Enjoying a concert is a fun thing. However, hosting it is more fun. When you are one of the organizers of a concert, then you got to get the proper lighting to set up the stage. The said lighting must be appropriate to the kind of concert you are having. One of the best lighting you can have would be RGB laser show system.
The said equipment is the one where you will be using lasers to shoot off beams that will make the venue more concert-like. The stage will be adorned with different colored lights. The audience will feel more excitement as well. If you plan to use this lighting to make the event successful, then here are the factors to take note of.
First, you have to be aware of the beam direction. The said equipment will usually be positioned in front of your audience so that the beams are aimed over their heads. You have to pick the right position where they can produce the best lighting that you need to achieve the special effect you require in the stage.
You will also have to be aware of the graphics screen you are going to use on the stage. For the graphics screen, the rear-projection is obviously preferred over the front-projection. You will achieve a more magical effect since the audience does not see the beams creating the graphics you want to let them see.
It is important that you are aware of the equipment positioning as well. It is not just about the screen or the beams. You also have to worry about the direct-feed projects since these are what join the lasers as well as scanners to create a single projector unit. You have to do a proper job at the positioning of the equipment you are using.
The control positioning and set-up time should be considered as factors for choosing the said stage equipment as well. The lasers require a set-up time and you need to control the console space requirement such as lighting and audio. This is so that everything will be in sync and nothing will look out of place.
Safety regulations. The use of the said equipment can pose some risks when not used properly. That is why it is highly important to ensure that safety regulations are met regarding the use of these equipment. Not only the recognized safety rules, you also have to follow the federal and government law regarding the matter.
Ceiling heights. The ceiling heights are the lateral space and height between the audience and the said equipment. You have to take note of how much space you should put in between these two so that there is more space. As long as you remember the right amount of space to follow, it should be okay.
Pay attention to any reflective surfaces in the venue. When there are reflective surfaces such as chandeliers and mirror strips in the venue, make sure that the beams does not bounce off into the audience area. If this is the case, then you have to mas the beams to avoid stray reflections. The audience might be harmed if you do not take this safety precaution for them seriously.
The said equipment is the one where you will be using lasers to shoot off beams that will make the venue more concert-like. The stage will be adorned with different colored lights. The audience will feel more excitement as well. If you plan to use this lighting to make the event successful, then here are the factors to take note of.
First, you have to be aware of the beam direction. The said equipment will usually be positioned in front of your audience so that the beams are aimed over their heads. You have to pick the right position where they can produce the best lighting that you need to achieve the special effect you require in the stage.
You will also have to be aware of the graphics screen you are going to use on the stage. For the graphics screen, the rear-projection is obviously preferred over the front-projection. You will achieve a more magical effect since the audience does not see the beams creating the graphics you want to let them see.
It is important that you are aware of the equipment positioning as well. It is not just about the screen or the beams. You also have to worry about the direct-feed projects since these are what join the lasers as well as scanners to create a single projector unit. You have to do a proper job at the positioning of the equipment you are using.
The control positioning and set-up time should be considered as factors for choosing the said stage equipment as well. The lasers require a set-up time and you need to control the console space requirement such as lighting and audio. This is so that everything will be in sync and nothing will look out of place.
Safety regulations. The use of the said equipment can pose some risks when not used properly. That is why it is highly important to ensure that safety regulations are met regarding the use of these equipment. Not only the recognized safety rules, you also have to follow the federal and government law regarding the matter.
Ceiling heights. The ceiling heights are the lateral space and height between the audience and the said equipment. You have to take note of how much space you should put in between these two so that there is more space. As long as you remember the right amount of space to follow, it should be okay.
Pay attention to any reflective surfaces in the venue. When there are reflective surfaces such as chandeliers and mirror strips in the venue, make sure that the beams does not bounce off into the audience area. If this is the case, then you have to mas the beams to avoid stray reflections. The audience might be harmed if you do not take this safety precaution for them seriously.
About the Author:
Welcome to our official web page where you can learn more about RGB laser show system. To get all the info you need, just click here http://www.stagelasers.com.
No comments:
Post a Comment